Articles in International Journals 

132) M. M. Torunbalci, H. D. Gavcar; F. Yesil; S. E. Alper; T. Akin, "An All-Silicon Process Platform for Wafer-Level Vacuum Packaged MEMS Devices," IEEE Sensors Journal, 2021. 10.1109/JSEN.2021.3073928

131) A Low-Profile Autonomous Interface Circuit for Piezoelectric Micro-Power Generators By: Ciftci, Berkay; Chamanian, Salar; Koyuncuoglu, Aziz; et al. IEEE Transactions on Circuits and Systems I-Regular Papers Volume: ‏ 68 Issue: ‏ 4 Pages: ‏ 1458-1471 Published: ‏ APR 2021

130) 13.56 MHz Triple Mode Rectifier Circuit With Extended Coupling Range for Wirelessly Powered Implantable Medical Devices By: Engur, Yasemin; Yigit, H. Andac; Kulah, Haluk

IEEE Transactions on Biomedical Circuits and Systems Volume: ‏ 15 Issue: ‏ 1 Pages: ‏ 68-79 Published: ‏ FEB 2021

129) Interband optical absorption obtained by pseudopotential method for type-II InAs/GaSb SL photodetectors By: Akel, Kazim; Hostut, Mustafa; Akin, Tayfun; et al. Journal of Physics D-Applied, Physics Volume: ‏ 54 Issue: ‏ 19 Article Number: 195103 Published: ‏ MAY 13 2021

128) Wafer-Level Low-Temperature Solid-Liquid Inter-Diffusion Bonding With Thin Au-Sn Layers for MEMS Encapsulation By: Temel, Oguzhan; Kalay, Yunus Eren; Akin, Tayfun Journal of Micro Electromechanical Systems Volume: ‏ 30 Issue: ‏ 1 Pages: ‏ 64-71 Published: ‏ FEB 2021

127) G. Demirhan ve T. Akın, "Resonance-Based Temperature Sensors using a Wafer Level Vacuum Packaged SOI MEMS Process," Advanced Materials Letters, 10.5185/amlett.2020.011462

126) K. Azgın, T. Köse ve O. Kaya, "A Dual-Resonator Temperature Sensing Approach With Time Base Error Suppression," IEEE Sensors Journal, 10.1109/JSEN.2019.2943289

125) D. Gökçen, İ. Bozyel ve Y. Şekertekin, "A Flexible and Low-Cost Tactile Sensor Produced by Screen Printing of Carbon Black/PVA Composite on Cellulose Paper," Sensors MDPI, 10.3390/s20102908

124) T. Akın, "Low-Cost LWIR-Band CMOS Infrared (CIR) Microbolometers for High Volume Applications," 33rd IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2020, 10.1109/mems46641.2020.9056383

123) Aydemir ve T. Akın, "Self-Packaged Three Axıs Capacıtıve Mems Accelerometer," 33rd IEEE International Conference on Micro Electro Mechanical Systems (MEMS), 10.1109/mems46641.2020.9056192

122) T. Akın, M. Y. Tanrıkulu, A. K. Okyay, O. Akar ve A. Saraç, "Realization of Single Layer Microbolometer Detector Pixel Using ZnO Material," IEEE Sensors Journal, 10.1109/jsen.2020.2992991

121) H. Külah, E. Yıldırım, A. C. Atik, M. D. Özkan ve Ebru Öztürk, "Modeling and fabrication of electrostatically actuated diaphragms for on-chip valving of MEMS-compatible microfluidic systems," Journal of Micromechanics and Microengineering, 10.1088/1361-6439/aba16f

120) K. Azgın ve E. Şimşek, "MEMS Resonant Temperature Sensing with Variable Coupling Stiffness and Improved Sensitivity," IEEE, 10.1109/IFCS-ISAF41089.2020.9234946

119) K. Azgın ve E. Şimşek, "A MEMS Based Lens Microscanner for Resolution Enhancement of Infrared Imaging Systems," IEEE, 10.1109/SENSORS43011.2019.8956944

118) D. Gökçen ve E. Gül, "Active Memristive Layer Deposition via Mn(II)-Assisted Anodic Oxidation of Titanium," ECS Journal of Solid State Science and Technology, 10.1149/2162-8777/ab9519

117) M. S. Hanay, E. Orhan, M. Yüksel, A. B. Ari, C. Yanik, U. Hatipoğlu ve A. M. Yağcı, "Performance of Nano-Electromechanical Systems as Nanoparticle Position Sensors," Frontiers in Mechanical Engineering, 10.3389/fmech.2020.00037

116) H. C. Tekin, "Magnetic Susceptibility-Based Protein Detection Using Magnetic Levitation," Analytical Chemistry, 10.1021/acs.analchem.0c02479

115) T. Akın, Y. E. Kalay ve O. Temel, "Wafer-Level Low-Temperature Solid-Liquid Inter-Diffusion Bonding With Thin Au-Sn Layers for MEMS Encapsulation," Journal of Microelectromechanical Systems, 10.1109/JMEMS.2020.3040039

114) H. Külah, A. Muhtaroğlu ve S. Chamanian, "A Self-Adapting Synchronized-Switch Interface Circuit for Piezoelectric Energy Harvesters," IEEE Transactıons On Power Electronıcs, 10.1109/tpel.2019.2910410

113) H. Külah, Z. Çağlayan ve Y. Demircan Yalçın, "Examination of the Dielectrophoretic Spectra of MCF7 breast Cancercells and Leukocytes," Electrophoresis, 10.1002/elps.201900374

112) H. Külah, M. Okan, D. Çetin ve E. Bat, "A comparative study on EpCAM antibody immobilization on gold surfaces and microfluidic channels for the detection of circulating tumor cells," Colloids and Surfaces B: Biointerfaces, 10.1016/j.colsurfb.2020.110808

111) D Cetin, M Okan, E Bat, H Kulah, " A comparative study on EpCAM antibody immobilization on gold surfaces and microfluidic channels for the detection of circulating tumor cells", Colloids and Surfaces B: Biointerfaces, 2020, 188, 110808

110) B Şen-Doğan, M Okan, N Afşar-Erkal, E Özgür, Ö Zorlu, H Külah, " Enhancement of the Start-Up Time for Microliter-Scale Microbial Fuel Cells (µMFCs) via the Surface Modification of Gold Electrodes", Micromachines, 2020, 11 (7), 703

109) Z Caglayan, Y Demircan Yalcin, H Kulah, "A Prominent Cell Manipulation Technique in BioMEMS: Dielectrophoresis" , Micromachines, 202109)

108) Z Caglayan, Y Demircan Yalcin, H Kulah, "Examination of the dielectrophoretic (DEP) spectra of MCF7 breast cancer cells and leukocytes", Electrophoresis, 2020

107) H. Külah, Ö. Zorlu, E. Özgür, N. A. Erkal, M. Okan ve B. Şen Doğan, "Enhancement of the Start-Up Time for Microliter-Scale Microbial Fuel Cells (mu MFCs) via the Surface Modification of Gold Electrodes," Micromachines, 10.3390/mi11070703

106) H. Külah, Y. Demircan Yalçın ve Z. Çağlayan, "A Prominent Cell Manipulation Technique in BioMEMS: Dielectrophoresis," Micromachines, 10.3390/mi11110990

105) H. Külah, E. Yıldırım, E. Özgür, A. C. Atik, M. K. Aslan ve M. D. Özkan, "Droplet based cell screening system integrated with CMOS image sensor and android-based application," 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2017

104) S. Chamanian, A. Muhtaroğlu, H. Külah, "A self-adapting synchronized-switch interface circuit for piezoelectric energy harvesters," Accepted to IEEE Transactions on Power Electronics, 2019.

103) Y. Demircan, S. Sukas, T. Töral, U. Gündüz, H. Külah, "Exploring the relationship between cytoplasmic ion content variation and multidrug resistance in cancer cells via ion-release based impedance spectroscopy," Accepted to Sensors and Actuators: B Chemical, 2019.

102) S. Chamanian, B. Çiftci, H. Uluşan, A. Muhtaroğlu, H. Külah, "Power-Efficient Hybrid Energy Harvesting System for Harnessing Ambient Vibrations," Accepted to IEEE Transactions on Circuits and Systems (TCAS) – I, 2019,

101) H. Ulusan, S. Chamanian, B. İlik, A. Muhtaroğlu, and H. Külah, "Fully-Implantable Cochlear Implant Interface Electronics with 51.2 μW Front-End Circuit," Accepted to IEEE Transactions on Very Large Scale Integration Systems, 2019.

100) S. Chamanian, S. Baghaee, H. Uluşan,Ö. Zorlu,E. Uysal-Bıyıkoğlu, H. Külah, "Implementation of Energy-Neutral Operation on Vibration Energy Harvesting WSN," Accepted to IEEE Sensors, 2018.

99) B. İlik, A. Koyuncuoğlu, Ö. Sardan-Sukas, and H. Külah, "Thin Film Piezoelectric Acoustic Transducer for Fully Implantable Cochlear Implants," Accepted to Sensors and Actuators A: Physical, 2018.

98) S. Chamanian, H. Uluşan, A. Koyuncuoğlu, A. Muhtaroğlu, H. Külah, "An Adaptable Interface Circuit with Multi-Stage Energy Extraction for Low Power Piezoelectric Energy Harvesting MEMS," Accepted to IEEE Transactions on Power Electronics, 2018.

97) H. C. Ateş, E. Özgür, and H. Külah, "Comparative Study on Antibody Immobilization Strategies for Efficient Circulating Tumor Cell Capture," Biointerphases, Vol. 13, No. 2, 021001, March 2018.

96) E. Aydın, M. Kangül, F. Gökçe, Ö. Zorlu, and H. Külah, "A Second Harmonic Based Resonance Characterization Method for MEMS Electrostatic Resonators," Sensors and Actuators A: Physical, vol. 274, pp. 220-230, 2018.

95) O. Yaşar, H. Uluşan, Ö. Zorlu, and H. Külah, "Optimization of AA-Battery Sized Electromagnetic Energy Harvesters: Reducing the Resonance Frequency Using a Non Magnetic Inertial Mass," IEEE Sensors, Vol. 18, No. 11, pp. 4509- 4516, June 2018.

94) H. Ulusan, S. Chamanian, W. P. M. R. Pathirana, O. Zorlu, A. Muhtaroglu, and H. Külah, "A Triple Hybrid Micropower Generator with Simultaneous Multi-Mode Energy Harvesting," IoP Smart Materials and Structures, Vol. 27, No. 1, 014002, Jan 2018.

93) M. Kangül, E. Aydın, F. Gökçe, Ö. Zorlu, H. Külah, "Analysis and Elimination of the Capacitive Feedthrough Current on Electrostatically Actuated and Sensed Resonance Based MEMS Sensors," IEEE Journal of Microelectromechanical Systems, Vol. 26, No. 6, pp. 1272-1278, December 2017.

92) K. Gharehbaghi, F. Kocer, and H. Külah, "Optimization of Threshold Self-Compensated UHF Rectifiers with Charge Conservation Principle," IEEE Transactions on Circuits and Systems I: TCAS-I, Vol. 64, No. 9, pp. 2380-2387, September 2017.

91) H. Ulusan, O. Zorlu, A. Muhtaroglu, and H. Külah, "A Highly Integrated 3 V Supply Electronics for Electromagnetic Energy Harvesters with Minimum 0.4 Vpeak Input," IEEE Transactions on Industrial Electronics, Vol. 64, Issue 7, pp. 5460-5467, July 2017.

90) K. Gharehbaghi, O. Zorlu, F. Kocer, and H. Külah, "Threshold Compensated UHF Rectifier with Local Self-Calibrator," IEEE Microwave and Wireless Components Letters, Vol. 27, Issue 6, pp. 575-577, June 2017.,

89) K. Demirel, E. Yazgan, S. Demir, and T. Akin, "A folded leg Ka-band RF MEMS shunt switch with amorphous silicon (a-Si) sacrificial layer," Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, Vol. 23, Iss. 5, pp. 1191-1200, Springer, May 2017. 10.1007/s00542-016-2892-5

88) K. Gharehbaghi, O. Zorlu, F. Kocer, and H. Külah, "Modelling and efficiency optimisation of UHF Dickson rectifiers," IET Circuits, Devices & Systems, Vol. 10, Issue 6, pp. 504-413, November, 2016.

87) S. Chamanian, H. Uluşan, Ö. Zorlu, S. Baghaee, E. Uysal-Biyikoglu, H. Külah, "Wearable battery-less wireless sensor network with electromagnetic energy harvesting system," Sensors and Actuators A: Physical, Volume 249, Pages 77-84, October 2016.

86) Sedat Pala, Kıvanç Azgın, "A MEMS Square Chladni Plate Resonator", Journal Of Micromechanics And Microengineering, Doi: 10.1088/0960-1317/26/10/105016, Vol. 26 (2016), 13pp.

85) A. Aydemir, Y. Terzioglu, and T. Akin, "A New Design and a Fabrication Approach to Realize a High Performance Three Axes Capacitive MEMS Accelerometer," Sensors and Actuators A, Vol. 244, pp. 324-333, June 2016. 10.1016/j.sna.2016.04.007

84) S. H. Altinoluk, H. E. Ciftpinar, O. Demircioglu, F. Es, G. Baytemir, O. Akar, A. Aydemir, A. Sarac, T. Akin, R. Turan, "Light trapping by micro and nano-hole texturing of single-crystalline silicon solar cells," Elsevier Energy Procedia, pp. 291-296, 2016.

83) T. Kose, K. Azgin, and T. Akin, "Design and Fabrication of a High Performance Resonant MEMS Temperature Sensor," Journal of Micromechanics and Microengineering, March 2016.

82) K. Demirel, S. Demir, E. Yazgan, and T. Akin, "A New Temperature-Tolerant RF MEMS Switch Structure Design and Fabrication for Ka-Band Applications," IEEE/ASME Journal of Microelectromechanical Systems, Vol. 25, No. 1, pp. 60-68, Feb. 2016. 10.1109/JMEMS.2015.2485659

81) G. Bahrieh, M. Erdem, E. Ozgur, U. Gunduz, and H. Külah, "Characterization of the Distribution of Rotational Torque on Electrorotation chips with 3D Electrodes," Electrophoresis, Vol. 36, Issue 15, pp. 1785-1794, August 2015.

80) H. Ulusan, K. Gharehbaghi, O. Zorlu, A. Muhtaroglu, and H. Külah, "A Fully-Integrated and Battery-Free Interface for Low Voltage Electromagnetic Energy Harvesters," IEEE Transactions on Power Electronics, Vol. 30, No. 7, pp-3712-3719. July 2015.

79) Utku Göreke, Sahar Habibiabad, Kıvanç Azgın, Yeşim Serinağaoğlu Doğrusöz, Mustafa İlker Beyaz,"The Development and Performance Characterization of Turbine Prototypes for a MEMS Spirometer", IEEE Sensors Journal, Doi: 10.1109/JSEN.2015.2488104

78) Y. Demircan, A. Koyuncuoğlu, M. Erdem, E. Özgür, U. Gündüz, H. Külah, "Label-free Detection of Multidrug Resistance in K562 Cells through Isolated 3D-Electrode Dielectrophoresis," Electrophoresis, Vol. 36, pp. 1149-1157, May 2015.

77) E. Erdil, K. Topallı, N. S. Esmaeilzad, O. Zorlu, H. Külah, and O.A. Civi, "Reconfigurable Nested Ring-Split Ring Transmitarray Unit Cell Employing the Element Rotation Method by Microfluidics," IEEE Transactions on Antennas & Propagation, Vol. 63, pp. 1163-1167, March 2015.

76) Y. Adiguzel and H. Külah, "Breath Sensors for Lung Cancer Diagnosis," Biosensors and Bioelectronics, Vol. 65, pp. 121-138, March 2015.

75) M. M. Torunbalci, S. E. Alper, and T. Akin, "A Method for Wafer Level Hermetic Packaging of SOI-MEMS Devices with Embedded Vertical Feedthroughs using Advanced MEMS Process," Journal of Micromechanics and Microengineering, Vol. 25, 125030, pp. 1-11, 2015.

74) S. Tez, U. Aykutlu, M. M. Torunbalci, and T. Akin, "A Bulk-Micromachined Three-Axis Capacitive MEMS Accelerometer on a Single Die," IEEE/ASME Journal of Microelectromechanical Systems,Vol. 24, No. 5, pp. 1264-1274, October 2015. 2015.

73) K. Demirel, S. Demir; E. Yazgan, and T. Akin, "Cantilever Type Radio Frequency MEMS Shunt Capacitive Switch Design and Fabrication," J. Micro/Nanolith. MEMS MOEMS 14(3), 035005 (2015). doi: 10.1117/1.JMM.14.3.035005

72) M. M. Torunbalci, S. E. Alper, and T. Akin, "Advanced MEMS (aMEMS) Process for Wafer Level Hermetic Encapsulation of MEMS Devices using SOI Cap Wafers with Vertical Feedthroughs," IEEE/ASME Journal of Microelectromechanical Systems, Vol. 24, No. 3, pp. 556-564, June 2015.

71) M. M. Torunbalci, S. E. Alper, and T. Akin, "Wafer Level Hermetic Sealing of MEMS Devices with Vertical Feedthroughs using Anodic Bonding," Sensors and Actuators A, Vol. 224, pp. 169-176, April 2015.

70) C. Cetintepe, E. S. Topalli, S. Demir, O. A. Civi, and T. Akin, "A Fabrication Process based on Structural Layer Formation using Au–Au Thermocompression Bonding for RF MEMS Capacitive Switches and Their Performance," Int. Journal of Microwave and Wireless Technologies, Vol. 6, No. 5, pp. 473-480, July 2014.

69) G. Bahrieh, M. Erdem, E. Ozgur, U. Gunduz, and H. Kulah, "Assesment of Effects of Multi Drug Resistance on Dielectric Properties of K562 Leukemic Cells Using Electrorotation," RSC Advances, 4, pp. 44879-44887, 2014.

68) S. Chamanian, S. Baghee, H. Ulusan, O. Zorlu, H. Kulah, and E. Uysal-Biyikoglu, "Powering-up Wireless Sensor Nodes Utilizing Rechargeable Battery and Electromagnetic Vibration Energy Harvesting System," MDPI Energies, 7, Special Issue on "Green IT and IT for Smart Energy Savings", pp. 6323-6339, 2014

67) L. Beker, Ö. Zorlu and H. Külah, "A Parylene Coating Based Room Temperature Wafer-Level Attachment Method for MEMS Integration with Zero Applied Force," Sensors and Actuators A, vol. 215, pp. 1-7, August 2014.

66) H. Torul, H. Ciftci, F. Dudak, Y. Adiguzel, H. Külah, İ. Boyaci, U. Tamer, "Glucose determination based on two component self–assembled monolayer functionalized surface–enhanced Raman spectroscopy (SERS) probe," Analytical Methods, RSC, vol. 14, pp. 5097-5104, 2014.

65) H. Ceylan Koydemir, H. Külah, A. Alp, A. H. Üner, G. Hasçelik and C. Özgen, "A Fully Microfabricated Electrochemical Sensor and its Implementation for Detection of Methicillin Resistance in Staphylococcus aureus," IEEE Sensors, Vol. 14, No. 6, pp. 1844-1851, June 2014.

64) Y. Adiguzel and H. Külah, "Studies on Visual Detection and Surface Modification Testing of Glass Microfiber Filter Based Biosensor," Biosensors and Bioelectronics, Vol. 54, pp. 27-34, April 2014,

63) H. Ceylan Koydemir, H. Külah, C. Özgen, "Solvent Compatibility of Parylene C Film Layer," IEEE Jounal of MEMS, Vol. 23, No. 2, pp. 298-307, April 2014.

62) U. Sonmez, H. Kulah, and T. Akin, "A ΣΔ Micro Accelerometer with 6 µg/√Hz Resolution and 130 dB Dynamic Range," Analog Integrated Circuits and Signal Processing, Vol. 81, No. 2, pp 471-485, November 2014.

61) E. Battal, S. Bolat, M. Y. Tanrikulu, A. K. Okyay, and T. Akin, "Atomic Layer Deposited Zinc-Oxide as Tunable Uncooled Infrared Microbolometer Material," Physica Status Solidi A: Applications and Materials Science, Vol. 211, No. 11, pp. 2475–2482, November 2014.

60) I. Comart, K. Topalli, S. Demir, and T. Akin, "Microwave Characterization of a Wafer-Level Packaging Approach for RF MEMS Devices Using Glass Frit Bonding," IEEE Sensors Journal, Vol. 14, No. 6, pp. 2006-2011, June 2014.

59) J. Musayev, Y. Adıgüzel, H. Kulah, Selim Eminoglu, and T. Akin, "Label-free DNA Detection Using a Charge Sensitive CMOS Microarray Sensor Chip," IEEE Sensors Journal, Vol. 14, No. 5, pp. 1608-1616, May 2014.

58) J. Musayev, C. Altiner, Y. Adıgüzel, H. Kulah, Selim Eminoglu, and T. Akin, "Capturing and Detection of MCF-7 Breast Cancer Cells with a CMOS Image Sensor," Sensors and Actuators A, Vol. 215, pp. 105-114, August 2014.

57) S. Sonmezoglu, S. E. Alper, and T. Akin, "An Automatically Mode-Matched MEMS Gyroscope with Wide and Tunable Bandwidth," IEEE/ASME Journal of Microelectromechanical Systems, Vol. 23, No. 2, pp. 284-297, April 2014.

56) M. Unlu, S. Demir, and T. Akin, "A 15-40 GHz Frequency Reconfigurable RF MEMS Phase Shifter," IEEE Transactions on Microwave Theory and Techniques, Vol. 61, No. 8, pp. 2865-2877, August 2013.

55) O. Aydin and T. Akin, "A Bulk-Micromachined Fully Differential MEMS Accelerometer With Split Interdigitated Fingers," IEEE Sensors Journal, Vol. 13, No. 8, pp. 2914-2921, August 2013.

54) Y. Demircan, E. Özgür, H. Külah, "Dielectrophoresis: Applications and Future Outlook in Point of Care," Electrophoresis, Vol. 34, pp. 1008-1027, 2013.

53) Ö. Zorlu and H. Külah, "A MEMS Energy Harvester for Generating Energy from Non-Resonant Environmental Vibrations," Sensors and Actuators A, vol. 202, pp. 124-134, November 2013.

52) M. Unlu, S. Demir, and T. Akin, "Triple Stub Circuit Topology as Simultaneous Insertion Phase, Amplitude, and Impedance Control Circuit for Phased Array Applications," IET Microw. Antennas Propag., Vol. 6, Iss. 13, pp. 1399–1406, 2012.

51) K. Azgin, T. Akin, and L. Valdevit, "Ultra High Dynamic Range Resonant MEMS Load Cells for Micromechanical Test Frames," IEEE/ASME Journal of Microelectromechanical Systems, Vol. 21, No. 6, pp. 1519-1529, Dec. 2012.

50) A. Aydemir and T. Akin, "Prevention of Sidewall Redeposition of Etched By-Products in Dry Au Etch Process," Journal of Micromechanics and Microengineering, Vol. 22, No. 7, 074004, pp. 1 6, June 2012.

49) M. Pakdemir, D. Ertürkan, H. Külah, İ. Boyaci, C. Ozgen, U. Tamer, "Ultrasensitive and Selective Homogeneous Sandwich Immunoassay Detection by Surface Enhanced Raman Scattering (SERS)," Analyst, RSC, Vol. 137(1), pp. 202-8, 2012.

48) Y. Adiguzel and H. Külah, "CMOS Cell Sensors for Point-of-Care Diagnostics," MDPI Sensors, Vol. 12, No. 8, pp. 10042-10066; 2012.

47) E. Yildirim, S. Arikan, and H. Külah, "A Normally-Closed Electrostatic Parylene Microvalve for Micro Total Analysis Systems," Sensors and Actuators A, vol. 181, pp. 81-86, July 2012 .

46) A. Rahimi, O. Zorlu, A. Muhtaroglu, and H. Külah, "An Electromagnetic Energy Harvesting System for Low Frequency Applications with a Passive Interface ASIC in Standard CMOS," Sensors and Actuators A, vol. 168, pp. 158-166, 2012.

45) A. Rahimi, O. Zorlu, A. Muhtaroglu, and H. Külah, "A Fully Self-Powered Electromagnetic Energy Harvesting System with Highly Efficient Dual Rail Output," IEEE Sensors Journal, Vol. 12, No. 6. June 2012.

44) E. Yildirim and H. Külah, "Electrostatic Energy Harvesting by Droplet Based Multi-Phase Microfludics," Microfluidics and Nanofluidics, Vol. 13, pp. 107-111, DOI 10.1007/s10404-012-0946-2, 2012

43) Koyuncuoğlu, R. Jafari, T. Okutucu-Özyurt, and H. Külah, "Heat Transfer and Pressure Drop Experiments on CMOS Compatible Microchannel Heat Sinks for Monolithic Chip Cooling Applications," International Journal of Thermal Sciences, Vol.56, pp. 77-85, June 2012.

42) E. Tatar, S. E. Alper, and T. Akin, "Quadrature Error Compensation and Corresponding Effects on the Performance of Fully Decoupled MEMS Gyroscopes," IEEE/ASME Journal of MicroElectroMechanical Systems, Vol. 21, No. 3, pp. 656-667, June 2012.

41) O. Bayraktar, O. Aydin-Civi, and T. Akin, "Beam Switching Reflectarray Monolithically Integrated with RF MEMS Switches," IEEE Transactions on Antennas & Propagation, Vol. 60, No. 2, pp. 854-862, Feb.2012.

40) C. E. Cansoy, H. Y. Erbil, O. Akar, T. Akin, "Effect of Pattern Size and Geometry on the Use of Cassie-Baxter Equation for Superhydrophobic Surfaces," Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 386, pp. 116-124, August 2011.

39) E. Yildirim and H. Külah, "Analysis and characterization of an electrostatically actuated in-plane parylene microvalve," Journal of Micromechanics and Microengineering, Institute of Physics Publishing, Vol. 21, No. 10, 105009, October 2011,

38) H. Ceylan Koydemir, H. Külah, C. Özgen, A. Alp, G. Hasçelik, "MEMS Biosensors for Detection of Methicillin Resistant Staphylococcus aureus," Biosensors and Bioelectronics, Vol. 29, No. 1, pp. 1-12, October 2011,

37) D. Eroglu and H. Külah, "Quality Factor Enhancement of Lateral Microresonators in Liquid Media by Hydrophobic Coating," IEEE Journal of MEMS, Vol. 20, No. 5, pp. 1068-1070, October 2011, (doi: 10.1109/JMEMS.2011.2160936

36) G. Yılmaz, A. T. Çiftlik, and H. Külah, "A MEMS-Based Spiral Channel Dielectrophoretic Chromatography System for Cytometry Applications," BioTechnology Journal, Wiley, Vol. 6, pp. 185-194, February 2011, (doi: 10.1002/biot.201000204)

35) Ö. Zorlu, E. T. Topal, and H. Külah, "A Vibration-Based Electromagnetic Energy Harvester Using Mechanical Frequency Up-Conversion Method," IEEE Sensors Journal, Vol. 11, No. 2, pp. 481-488, February 2011, (doi: 10.1109/JSEN.2010.2059007)

34) A. Torrents, K. Azgin, S. W. Godfrey, E. S. Topalli, T. Akin, and L. Valdevit, "MEMS Resonant Load Cells for Micro-Mechanical Test Frames: Feasibility Study and Optimal Design," Journal of Micromechanics and Microengineering, Vol. 20, No. 12, 125004, pp. 1-17, Dec. 2010.

33) B. Bayram, O. Akar, and T. Akin, "Plasma-Activated Direct Bonding of Diamond-on-Insulator Wafers to Thermal Oxide Grown Silicon Wafers," Diamond and Related Materials, Vol. 19, No. 11, pp. 1431-1435, Nov. 2010.

32) İ. Sarı, T. Balkan, and H. Külah, "An Electromagnetic Micro Power Generator For Low Frequency Environmental Vibrations Based on The Frequency Up-Conversıon Technique" IEEE Journal of MEMS, Vol. 19, No. 1, pp. 14-27, January 2010, (doi: 10.1109/JMEMS.2009.2037245)

31) I. E. Ocak, R. Kepenek, H. Kulah, and T. Akin, "A High Performance Sigma-Delta Readout Circuitry for µg Resolution Microaccelerometers," Analog Integrated Circuits and Signal Processing, Vol. 64, No. 2, pp.137-145, August 2010 (doi: 10.1007/s10470-009-9433-4).

30) M. Unlu, K. Topalli, H. I. Atasoy, S. Demir, O. Aydin Civi, and T. Akin, "Hybrid Connection of RF MEMS and SMT Components in an Impedance Tuner," AEU International Journal of Electronics and Communications, Vol. 64, No. 8, pp. 748-756, August 2010.

29) K. Topalli, E. Erdil, O. Aydin Civi, S. Demir, S. Koc, and T. Akin, "Tunable Dual-Frequency RF MEMS Rectangular Slot Antennas," Sensors and Actuators A, Vol. 156, No. 2, pp. 373-380, December 2009.

28) K. Topalli, M. Unlu, H. I. Atasoy, S. Demir, O. A. Civi, and T. Akin, "Empirical Formulation of Bridge Inductance in Inductively Tuned RF MEMS Shunt Switches," Progress In Electromagnetics Research, PIER 97, pp. 343-356, 2009. doi:10.2528/PIER09092502

27) E. Ekmekci, K. Topalli, T. Akin, and G. Turhan-Sayan, "A Tunable Multi-Band Metamaterial Design Using Micro-Split SRR Structures," Optics Express, Vol. 17, No. 18, pp. 16046-58, August 2009.

26) K. Sahin, E. Sahin, S. E. Alper, and T. Akin, "A Wide-Bandwidth and High-Sensitivity Robust Microgyroscope," Journal of Micromechanics and Microengineering, Vol. 19, No. 7, 074004,pp. 1-8, July 2009.

25) İ. Sarı, T. Balkan, and H. Külah, " An Electromagnetic Micro Energy Harvester Based on Array of Parylene Cantilevers," Journal of Micromechanics and Microengineering, Institute of Physics Publishing, 105023, October 2009.

24) J. Perruisseau-Carrier, K. Topalli, and T. Akin, "Low-loss Ku-band Artificial Transmission Line with MEMS Tuning Capability," IEEE Microwave and Wireless Components Letters, Vol. 19, No. 6, pp. 377-379, June 2009.

23) E. Sagiroglu Topalli, K. Topalli, S. E. Alper, T. Serin, and T. Akin, "Pirani Vacuum Gauges using Silicon-on-Glass and Dissolved-Wafer Processes for the Characterization of MEMS Vacuum Packaging," IEEE Sensors Journal, Vol. 9, No. 3, pp. 263-270, March 2009.

22) S. E. Alper, Y. Temiz, and T. Akin, "A Compact Angular Rate Sensor System using a Fully-Decoupled Silicon-on-Glass MEMS Gyroscope," IEEE/ASME Journal of MicroElectroMechanical Systems, Vol. 17, No. 6, pp. 1418-1429, Dec. 2008.

21) S. Sukas, A. E. Erson, C. Sert, and H. Külah, "A parylene based double-channel micro-electrophoresis system for rapid mutation detection via heteroduplex analysis," Electrophoresis Journal, Wiley-Blackwell, Vol. 29, No. 18, pp. 3752-58, September 2008.

20) İ. Sarı, T. Balkan, and H. Külah, "A Electromagnetic Micro Power Generator for for Wideband Environmental Vibrations," Sensors and Actuators A, Vol. 145-146, pp. 405-413, August 2008. (doi:10.1016/j.sna.2007.11.021)

19) H. Külah and K. Najafi, "Energy Scavenging from Low-Frequency Vibrations by Using Frequency Up-Conversion for Wireless Sensor Applications," IEEE Sensors Journal, Vol.8, No.3, pp. 261-268, March 2008. (doi:10.1109/JSEN.2008.917125)

18) B. Alaca, K. B. Toga, O. Akar, and T. Akin, "Strain-Controlled Bulge Test," Journal of Materials Research, Vol. 23, No. 12, pp. 3295-3302, Dec. 2008.

17) K. Topalli, O. Aydin Civi, S. Demir, S. Koc, and T. Akin, "A Monolithic Phased Array using 3-bit Distributed RF MEMS Phase Shifters," IEEE Trans. Microwave Theory Tech. Techniques, Vol. 56, pp. 270-277, February 2008.

16) S. Eminoglu, M. Y. Tanrikulu, and T. Akin, "A Low-Cost 128x128 Uncooled Infrared Detector Array in CMOS Process," IEEE/ASME Journal of MicroElectroMechanical Systems, Vol. 17, No. 1, pp. 20-30, February 2008.

15) B. Okcan and T. Akin, "A Low-Power Robust Humidity Sensor in a Standard CMOS Process," IEEE Transactions on Electron Devices, Vol. 54, No. 11, pp. 3071-3078, November 2007.

14) S. E. Alper, I. E. Ocak, and T. Akin, "Ultra-Thick and High-Aspect-Ratio Nickel Microgyroscope using EFABTM Multi-Layer Additive Electroforming," IEEE/ASME Journal of MicroElectroMechanical Systems, Vol. 16, No. 5, pp. 1025-1035, October 2007.

13) E. Erdil, K. Topalli, M. Unlu, O. Aydin Civi, and T. Akin, "Frequency Tunable Microstrip Patch Antenna using RF MEMS Technology," IEEE Trans. Antennas and Propagation, vol.55, no.4, p.1193-1196, April 2007.

12) S. E. Alper, K. Azgin, and T. Akin, "A High-Performance Silicon-on-Insulator MEMS Gyroscope Operating at Atmospheric Pressure," Sensors and Actuators A, Vol. 135/1, pp. 34-42, March 2007.

11) S. E. Alper, K. M. Silay, and T. Akin, "A Low-Cost Rate-Grade Nickel Microgyroscope," Sensors and Actuators A, Vol. 132/1, pp. 171-181, November 2006.

10) K. Topalli, M. Unlu, S. Demir, O. Aydin Civi, S. Koc, and T. Akin, "A New Approach for Modeling Distributed MEMS Transmission Lines," IEE Proc. Microwaves, Antennas & Propagation, Vol. 153, pp.152-162, April 2006.

9) S. E. Alper and T. Akin, A Single-Crystal Silicon Symmetrical and Decoupled MEMS Gyroscope on an Insulating Substrate," IEEE/ASME Journal of MicroElectroMechanical Systems, Vol. 14, No. 4, pp. 707-717, August 2005.

8) S. E. Alper and T. Akin, "A Symmetrical and Decoupled Nickel Microgyroscope on Insulating Substrate," Sensors and Actuators A, Vol. 115/2-3, pp. 336 350, 2004.

7) S. Eminoglu, D. Sabuncuoglu Tezcan, M.Y. Tanrikulu, and T. Akin, "Low-Cost Uncooled Infrared Detectors in CMOS Process," Sensors and Actuators A, Vol. 109/1-2, pp. 102-113, Dec. 2003.

6) H. Külah and T. Akin, "A Current Mirroring Integration Based Readout Circuit for High Performance Infrared FPA Applications," IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, Vol. 50, No. 4, pp. 181 -186, April 2003.

5) D. Sabuncuoglu Tezcan, S. Eminoglu, and T. Akin, "A Low Cost Uncooled Infrared Microbolometer Detector in Standard CMOS Technology," IEEE Trans. on Electron Devices, Vol. 50, No. 2, pp. 494-502, Feb. 2003.

4) S. E. Alper and T. Akin, "A Symmetric Surface Micromachined Gyroscope with Decoupled Oscillation Modes," Sensors and Actuators A, Vol. 97-98C, pp. 337-348, April 2002.

3) O. Akar, T. Akin, and K. Najafi, "A Wireless Batch Sealed Absolute Capacitive Pressure Sensor," Sensors and Actuators A, Vol.95/1, pp. 29-38, December 2001.

2) T. Akin, B. Ziaie, S. A. Nikles, and K. Najafi, "A Modular Micromachined High-Density Connector System for Biomedical Applications," IEEE Transactions on Biomedical Engineering, Vol. 46, No.4, pp.471-480, April 1999.

1) T. Akin, Z. Olgun, O. Akar, and H. Kulah, "An Integrated Thermopile Structure with High Responsivity Using Any Standard CMOS Technology," Sensors and Actuators A 66, pp. 218-224, April 1998.